Clock Functions - AEG DCE731110M User Manual

12 www.aeg.com
The Fast Heat Up decreases the heat up
time.
To turn on the Fast Heat Up press and
hold for more than 3 seconds.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
00:00
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12" flashes.
1. Press
2. Press
3. Press
4. Press
The display shows the new time.
To change the time of day press
again and again until
7.3 Setting the DURATION
1. Set a heating function and
temperature.
TIME OF DAY
DURATION
END
TIME DELAY
SET+GO
MINUTE MINDER
COUNT UP TIMER
and 12:00.
or to set the hours.
.
or to set the minutes.
.
starts to flash.
If the Fast Heat Up is turned on the
display shows flashing bars.
Application
To show or change the time of day. You can change the
time of day only when the oven is on.
To set how long the oven works.
To set when the oven turns off.
To combine DURATION and END function.
To turn on the oven with necessary settings with only
one press of the sensor field any time later.
To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE
MINDER at any time and also when the oven is off.
To set the count up, which shows how long the oven
works. This function has no effect on the operation of
the oven. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not turned on if DURA-
TION and END are set.
2. Press
starts to flash.
3. Press
DURATION.
4. Press
automatically after 5 seconds.
5. Press
DURATION.
6. Press
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing
turns off.
7. Press a sensor field to stop the
signal.
8. Turn off the oven.
again and again until
or to set the minutes for
or the DURATION starts
or to set the hours for
or the DURATION starts
and time setting. The oven