a
Pry the clips securing the memory module until the memory module pops-up [1].
b Lift the memory module from the connector [2].
Installing the memory module
1
Insert the memory module into the memory connector at a 30 degree angle until the contacts are fully seated into the slot. Then, press
the module until the clips secure the memory module.
2
Install the :
a
battery
b
base cover
3
Follow the procedure in
Billentyűzet
A billentyűzetrács eltávolítása
1
Kövesse a
Mielőtt elkezdene dolgozni a számítógép belsejében
2
Fejtse ki a billentyűzetrácsot z egyik bemélyedési pontról [1], majd folytassa a kifejtését az oldalakon az óramutató járásával megegyező
vagy azzal ellentétes irányban, aztán emelje ki a billentyűzetrácsot a rendszerből [2]
26
Szétszerelés és újbóli összeszerelés
After working inside your
computer.
című fejezet utasításait.