Installing The Heat Sink; Rendszerventilátor; Removing The System Fan - Dell Latitude 5491 Service Manual

Installing the heat sink

1 Place the heat sink on the system board.
2 Replace the four (M2x3) screws that secure the heat sink on the system board.
NOTE:
• Replace the heat sink screws in sequential order as indicated on the heat-sink.
3 Install the :
a battery
b base cover
4 Follow the procedure in
Rendszerventilátor

Removing the system fan

1 Follow the procedure in
2 Remove the:
a base cover
b battery
c hard drive
d SSD card
e SSD frame
f WLAN card
g WWAN card (optional)
After working inside your computer.
Before working inside your computer.
Szétszerelés és újbóli összeszerelés 31