Clock & Timer - Kenmore 36745 Use & Care Manual

TO SET THE CLOCK:
1. Press the CLOCK pad. "SET" and
"TIME" will show In the display.
2. Press either the UP or DOWN arrow pad,
until the display shows the correct time of
day.
The UP arrow will change numbering forward, such as
1, 2, 3. The DOWN arrow will change numbering
backwards, such as 3, 2, 1.
The clock will automatically start within one
minute; or you may press the clock pad for
immediate start.
TO RESET THE TIMER:
When you are setting the timer, If you pause more than
4 seconds while pressing either the UP or DOWN arrow
pad, "TIMER" will stop flashing In the display and the
timer will automatically start to count down. If this
should happen just press the TIMER ON/OFF pad and
you will be able to continue setting your time.
TO CANCEL THE TIMER:
While the timer Is counting down, press and hold down
the TIMER ON/OFF pad for 4 seconds, or until "I"IMER-
quits flashing and the current time of day returns to the
display.
TO SET THE TIMER:
The timer does not control oven operations, such as
bake, broil, clean or any delay function. It allows you to
set an amount of time and alerts you when that time is up.
An example would be timing a three minute egg. The
maximum amount of time you may set Is 9 hours and 55
minutes.
1. Press the TIMER ON/OFF pad. "SET"
and "TIMER" will flash and "HR" will
show in the display.
2. Press either the UP or DOWN arrow pad
to set the amount of time you want.
The timer will automatically start to count down within 4
seconds.
3. When the timer counts down to zero a
tone will sound. Press the CLOCK pad to
return to the current time of day,
10 NCCTL44-1