Samsung SCX-4216F Series Service Manual page 53

4.6.4 MEMORY CLEAR
CLEAR ALL MEMORY
The function resets the system as its very first condition as setting in at the factory.
This function is needed to operate to reset the system to the initial value when the product is abnormally
operated or malfunction. All the values are returned to the default values, and all the information, which set
in by user, will be erased.
< Method >
1. Select the [MEMORY CLEAR] at the TECH MODE.
2. Push the ENTER button.
3. Select you country.
4. Push the ENTER button then it will be all memory clear. .
NOTICE : Always perform the memory clear after replace the main board. Otherwise, the system
may not operate properly.
FIRMWARE VERSION
ENGINE VERSION
EMULATION VERSION
TOTAL PAGE COUNTS
TOTAL TONER COUNT
CRU PRINTS
REPLACED TONER COUNTS
REPLACED DRUM COUNTS
PLATEN SCAN PAGE COUNTS
ADF SCAN PAGE COUNTS
Samsung Electronics
: 1.00
: V0.7.6.i
: QPDL 1.13 12-11-2002
: 123
: 23
: 123
: 1
: 1
: 25
: 10
< SYSTEM DATA LIST >
Troubleshooting
4-19