3-13 Middle Cover
1. Before you remove the Middle Cover, you should
remove:
- Rear Cover (see page 3-2)
- Side Cover (LH, RH) (see page 3-6)
- Scanner Ass'y (see page 3-7)
- Front Cover (see page 3-14)
2. Remove the six screws securing the Top Cover and
remove it.
3-14 Fan
1. Before you remove the Fan, you should remove:
- Rear Cover (see page 3-2)
- Side Cover (RH) (see page 3-6)
Samsung Electronics
3. Unlatch the Top Cover Securing the Frame Ass'y,
using a proper tool as shown below. Then lift the Top
Cover out.
2. Unplug the connector from the SMPS and remove the
one screw. Then take out the Fan.
Disassembly and Reassembly
Top Cover
DC Fan
3-15