Samsung SF-530 Service Manual page 16

3-9 Scan Board
1. Before you remove Scan board, you should remove:
– Bracket scam board (see page 3-3)
2. Unplug all the connectors from the scan board and
remove the board.
3-10 Scan Motor
1. Before you disassemble Scan Motor, you should
remove:
– OPE cover (see page 3-3)
– Bracket scan board (see page 3-3)
2. Unplug one connector from the scan board.
3. Remove three screws, then remove the motor Ass'y
from the main frame.
Samsung Electronics
4. Take out the gear from the Motor Ass'y.
5. Remove two screws and remove the motor.
Disassembly and Reassembly
3-7