Samsung SF-530 Service Manual page 14

3-5 ADF Rubber
1. Open the OPE unit.
2. Insert a flat blade screw driver and pinset into the slot
as shown below, and release the latches. Take out the
Holder Rubber, Sheet ADF and the Rubber ADF.
Rubber ADF
Holder Rubber
Safely Precautions :
Do not force to open or fasten plastic material
components.
Samsung Electronics
Holder Rubber
Guide Boss
Rubber ADF
Pinset or
Screw Driver
Holder Rubber
Notes : • When you reassemble the them, be sure that
the Rubber ADF and Holder Rubber fit into the
guide boss and the Holder Rubber latches fit
into the corresponding hole. Then push firmly
until it clicks.
3. Clean the surface of the rubber pad with IPA (Isopropyl
Alcohol). After wiping it, be sure to dry it. Check the rub-
ber wear. If the wear reaches 1/2 its original thickness,
replace it with a new one.
Disassembly and Reassembly
Guide Boss
Rubber ADF
3-5