Add Administrator; Customize Passcodes Received From The App; Enable-Disable Auto-Lock; Vacation Mode - Honeywell 8832101S User Manual

PROGRAMMING PHYSICAL KEYPAD

5. ADD ADMINISTRATOR

To add the administrator you must use the App. Press any button on the keypad to wake up lock in order to
connect.

6. CUSTOMIZE PASSCODES RECEIVED FROM THE APP

a. Input the AP
b. - Green light and beep
c. 1
d.
e. Input
RP
f.
g.
NP
h.
i. Repeat
NP
j. - Green light and beep
7. ENABLE/DISABLE AUTO-LOCK
Disable - While in Auto-Lock mode, unlock the door with correct password, within 10 seconds you must turn the
locking knob by hand to the locked position. Wait more than 2 seconds then turn the locking knob back to the
unlock position. The Auto-Lock mode is now disabled.
Enable - While waiting more than 2 seconds, or press the

8. VACATION MODE

a. Input the AP
b. - Green light and beep
c. 10
d.
e. 1
f. - Green light and beep

9. DISABLE VACATION MODE

a. Press button for 3 seconds
b. Input the AP
c. - Green light and beep
VERY IMPORTANT
In order to change a Passcode, the Passcode
must have been sent from the App, and used by
the Receiver.
button on the keypad
18