Keypad Programming - Honeywell 8832101S User Manual

KEY PAD PROGRAMMING - OPTIONAL
EXTERIOR ASSEMBLY OVERVIEW
Programming Symbols
Lock / Clear
Unlock / Programming
AP
Administrator Passcode
RP
Received Code (6-9 digits)
NP
New Code (4-9 digits)
Programming Tips
Complete all the programming steps in the programming mode
within 5 seconds.
Use the key to clear entries in case a wrong button is pushed.
AP
Administrator Passcode:
(Admin Passcode is located on the Honeywell App under
Lock Settings.)
Indicator light
16
Green
• Indicates successful programming step
• Indicates unlocking is successful
Red
• Indicates failed programming step
• Indicates locking is successfu
Lock button
- Use to lock door
Lock
Unlock button
- Used to unlock door
Unlock
- Used in programming steps
Programming
Batteries (not included)
The electronic lock requires four (4) High Quality AA
Alkaline batteries. When all 4 batteries are installed
in the correct position, you will hear 2 beeps and
the keypad will illuminate blue. DO NOT TOUCH the
keypad until the keypad stops illuminating.
VERY IMPORTANT
The lock must be connected to the
App in order to program the keypad.
By default the factory keypad passcode is 1234
Change the Administrator passcode
it can easily be remembered by you after
connecting to a lock.
Once you connect the App to the lock, the
factory keypad passcode will be changed to
a new code, which can be found in the lock's
settings.
l
AP so