NEUTRIK NAC3MX-W Operating & Assembly Instruction

R
A. OPERATING INSTRUCTION
Application:
The power CON TRUE1 system is certified as connector with breaking cap
60320, VDE 0625.
serves to supply power to
qualified person only.
Connector Assignment:
APPLIANCE INLET
NAC3MPX
Power IN
NAC3FX-W
(Connector)
Approval based:
Rating:
Cable Type:
Strain Relief:
Cable O.D.:
B. ASSEMBLY INSTRUCTION
A
Insert cable into the
bushing and housing.
Note: "Apply cable
pulling lubricant to
cable jacket."
C
Place the chuck over
the cable.
D
Prepare the cable as
shown.
BDA 380
|
It is intended for use as
an appliance and from an appliance to another equipment.
APPLIANCE OUTLET
NAC3MX-W
(Plug connector)
VDE
EN 60320-1/EN60320-2-2
250 V ac / 16 A
H05VV-F3G 1.0 mm , Length max. 2 m
H05VV-F3G 1.5 - 2.5 mm
H07RN-F3G 1.5 mm
White chuck
6.0 - 12.0 mm
VDE (EN 60320-1/EN60320-2-2)
ASSEMBLY INSTRUCTION
power CON TRU 1
appliance couplers and interconnection couplers.
NAC3FPX
NAC3FPX-ST
Power OUT
NAC3FX-W
(Connector)
2
2
2
B
Separate the
housing from the
bushing (cable
remain in bushing)
C
2 mm 0
[ 0.787 "]
8 mm
[0.32"]
PE 23 mm
[ 0.9 "]
E
ac ity according IEC
To be installed by
APPLIANCE INLET - OUTLET
COMBINATION
NAC3PX
Power IN
NAC3MX-W
(Plug connector)
UL
UL 498 / CSA C22.2 No. 182.3
250 V ac / 20 A
SJTOW, SJOOW 3 x 12 AWG
White chuck
6.0 - 12.0 mm
2 mm
PE 23 mm
UL (UL 498 / CSA C22.2 No. 182.3)
It
Power OUT
0
[ 0.787 "]
8 mm
[0.32"]
[ 0.9 "]
Page 1