Advertisement
Content:
Qty
description
1
Front Cover
1+1
RH Bracket + LH Bracket
1
Back Cover
Instructions
Note: the full Barbecue assembly instructions can be found in the Barbecue Carton. These
instructions only refer to placement of Trims in Built-In situations.
1. Attach the RH Bracket and LH Bracket to Barbecue body using 8 off M6 x 12mm screws as
follows:
2. Place BBQ into its position in the bench, resting on the brackets installed in (1).
3. Attach the rear trim to place:
4. The front cover can be removed for accessing the Fat-Collecting Pan and replaced:
Images in this manual are for illustrative purposes only.
Due to constant improvement, BeefEater advises that
changes to the design, material, specifications and product
configuration may occur at any time without notice.
1100_TrimKit_Inst _V0
Qty
description
10
M6 x 12mm Screws
10
M6 Fiber Washers
NOTE:
Washers are to be placed
between the Barbecue body
and the bracket.
Woodland Home Products
3-5 Birmingham Av, Chester- Hill, NSW,
Australia, 2162
Phone: 1800 356 660
Facsimile: 02 9724 8899
E-mail: mail@beefeaterbbq.com
Website: www.beefeaterbbq.com
USA TollFree: 1866 550 2333
2
Advertisement
