Installation
4.9 Installing the Cable Glands and Stopping Plugs with
SmartConn
CAUTION!
Only use Ex-e or flameproof certified materials of an
appropriate IP value.
CAUTION!
Improper installation of cable glands or stopping plugs
will invalidate the Ex approval of the SmartRadar.
4.9.1 Cable Glands
Use increased safe (Ex-e) M20 cable glands with an appro-
priate IP value.
See the type plate on the device.
NOTE:
Install the cable glands according to the instructions
provided by the manufacturer.
4.9.2 Unused Cable Inlets
Seal unused cable inlets with approved threaded stopping
plugs.
4.10 Installing the Compound Glands, Conduits, and Stopping
Plugs without SmartConn
Depending on local regulations, this device can be cabled by
using compound glands, direct entry, or conduits.
CAUTION!
Only use Ex-d certified materials of an appropriate IP
value.
Installation Guide
26
SmartRadar FlexLine
Part No.: 4417.760_Rev06