Storage; Storage Of Uninstalled Devices; Storage Of Installed Devices; Before Installation - Honeywell Enraf SmartRadar FlexLine Installation Manual

Table of Contents

Advertisement

Installation

4.3 Storage

4.3.1 Storage of Uninstalled Devices

Keep the device in its original packing during storage. Keep the
device indoors during storage.
Ambient conditions
Temperature
Humidity

4.3.2 Storage of Installed Devices

If you do not use an installed device for a longer period, we
recommend not to disconnect the mains connection line. If this is
not possible, put some moisture-absorbing material (e.g. silica
gel) into the electronic compartment, and store the device in a
closed plastic bag.

4.4 Before Installation

Make sure following conditions are met:
 The antenna- and tank separator are already installed on the
tank (see SmartRadar Antennas installation guide).
 The top cover of the device can open without obstruction.
For required distances for installation, see FIG. 4-1.
 The wireless FlexLine complies with local radio regulations.
Part No.: 4417.760_Rev06
-50 to +85 °C (SmartView -30 to +85 °C)
20 to 90%
SmartRadar FlexLine
Installation Guide
19

Advertisement

Table of Contents
loading

Table of Contents