Table of Contents
Advertisement
Safety
2.3 Safety Instructions
2.3.1 Safety Instructions
See the safety instructions shipped with the device for
installation, commissioning, operation, and maintenance.
2.3.2 EC Declaration of Conformity (for EU)
See the EC declaration of conformity shipped with the device.
2.3.3 Control Drawings for FM & CSA
See the control drawings shipped with the device.
2.3.4 Wireless
Make sure the wireless FlexLine complies with local radio
regulations (FCC, ETSI, etc.).
2.3.5 Users
The mechanical and electrical installation must be carried out
only by trained personnel with knowledge of the requirements for
installation of explosion-proof equipment in hazardous areas.
The entire installation procedure must be carried out in
accordance with national, local, and company regulations.
The entire electrical installation shall be carried out in
accordance with the national requirements for electrical
equipment to be installed in hazardous areas.
NOTE:
See EN IEC 60079-14 or NEC (NFPA70).
2.3.6 Additional Information
If you require additional information, contact Honeywell Enraf or
its representative.
Installation Guide
4
SmartRadar FlexLine
Part No.: 4417.760_Rev06
Advertisement
Table of Contents
