Table of Contents
Advertisement
Installation
NOTE:
The DC polarity is not critical.
NOTE:
Install an explosion proof mains switch in the mains
cable to the SmartRadar.
Cable specifications
Type
Label
00. Vin-a/L
01. Vin-b/N
4.11.3.2 Enraf Fieldbus (BiPhase Mark)
Cable specifications
Type
Maximum length
Label
06. TL1
07. TL2
4.11.3.2.1 Topology
A maximum of 10 devices can be connected to the Enraf field
bus line.
Part No.: 4417.760_Rev06
Suitable for the SmartRadar power rating, and approved
for use in hazardous areas
Parameters
24-65 Vdc -15/+10%
65-240 Vac -15/+10%
50/60 Hz ± 10%
Automatic selection
Twisted pair; R
= 200 Ohm /line, C
max
10 km
Parameters
1200/2400/4800 bps
Selection by software
SmartRadar FlexLine
= 1 μF.
max
Installation Guide
33
Advertisement
Table of Contents
