Open The Cover - Honeywell Enraf SmartRadar FlexLine Installation Manual

Table of Contents

Advertisement

Installation

4.8.2 Open the Cover

A
FIG. 4-5 Opening the cover of the device
 Loosen the 16 bolts of the cover. Use an Allen key (8 mm).
CAUTION!
Make sure the 4 bolts (A) at the side of the hinge are
entirely screwed into the cover and do not protrude
beyond the flange of the cover. Otherwise the flange of
the housing can be damaged when closing the cover,
and this will invalidate the Ex certificate!
 Open cover
Part No.: 4417.760_Rev06
A
SmartRadar FlexLine
Installation Guide
25

Advertisement

Table of Contents
loading

Table of Contents