Beyerdynamic Xelento wireless Quick Start Manual page 6

6
Box contents
• Xelento wireless In-Ear Headphones,
left and right earphones
• Bluetooth connection with remote control
• Jack connection cable with remote control,
4-pole Jack 3.5 mm
• Seven pairs of silicone eartips
• Three pairs of foam eartips
(type Comply™ Tx-500)
• Cable clip for fastening the cable to clothes
• Cable clip for fastening the rechargeable battery to clothes
• Storage case
• One pair of spare protective grids
• This Quick Start Guide
Connection and cable replacement
To detach or fasten the cable, hold Xelento wireless by the
earphone housing and by the plug connector. Do not pull
the cable directly; you might damage the cable or the
earphones!
The right-hand side is marked by a raised dot on the
earphone housing and on the cable end.
Xelento wireless – In-Ear Headphones
Disconnect cable