Beyerdynamic Xelento wireless Quick Start Manual page 4

4
Thank you for your trust and for choosing Xelento wireless
In-Ear Headphones. To ensure an optimum listening
experience, we would like to give you a brief primer on how
to use Xelento.
Safety instructions
Caution:
When you connect the in-ear headphones, please
make sure that the volume level is set to
minimum. Adjust the volume level only after
inserting the eartips. To avoid possible hearing
damage, do not use your in-ear headphones for extended
periods of time at high volume. The ability to hear your
own voice while listening and speaking normally with
in-ear headphones can serve as a measure of correct
volume adjustment.
We would like to point out that excessively high volumes and
long listening times may cause hearing damage. Hearing
defects always constitute an irreversible impairment of
hearing ability.
Always ensure an adequate volume level. It is advisable to
keep listening times as short as possible at high volume
levels. According to the Occupational Health and Safety
Regulations of German trade associations BGV B3, noise
pollution e.g. in the workplace must not exceed 85 dB
(room volume level) during a maximum permissible
listening time of 8 hours. If the volume level is increased
by 3 dB respectively, the permissible listening time is cut
in half, i.e. at 88 dB, the listening time is 4 hours, at
91 dB 2 hours, etc.
Xelento wireless – In-Ear Headphones