Table of Contents
Advertisement
Maintenance and Repair
Prerequisites
Ensure that you—as the Installer, Operator or both—read and understand the prerequisites, warnings and important
notes within this topic.
System Updates
From time to time, Sea Recovery Corporation may make programming changes to the control logic. Other physical
production changes may also be made, and are tracked by Sea Recovery Corporation through the System's serial
number.
Remember: Troubleshooting and repair method results can vary depending on the information that is
displayed on the SYSTEM INFORMATION screen.
• SERIAL NUMBER: Helps Sea Recovery Corporation to determine the latest physical version and configuration
of your System, ensuring that you are provided with correct part information.
• TYPE: Tells Sea Recovery Corporation the production capacity of your System, which provides a bench mark in
diagnosing product water flow and pressure concerns.
• VERSION: Allows Sea Recovery Corporation to determine the specific sequential operation of the System based
on the programming control logic version.
Depending on the issue, Sea Recovery Corporation may also request the System's operating Voltage, cycles and
phase.
Installer Minimum Qualifications
The System's Installer must have technical expertise in the following areas:
• Electrical, Electronic, Electric Motors and Circuits
• Electromechanical and Mechanical Systems
• Hydraulic and Liquid Pressure and Flow Systems
• Piping and Plumbing Systems
• Water Suction and Pressure Lines
• Thru-Hull Fitting below and above water level
Do not attempt maintenance and repair if you are not proficient in the aforementioned fields of expertise.
Chapter
7
77
Advertisement
Table of Contents
