Sea Recovery Aqua Matic XL Compact Modular Series Owner's Manual page 41

a) Manually start and stop the Booster Pump.
b) Manually start and stop the High Pressure Pump.
c) Manually energize the 3-Way Product-Water Diversion Valve at a specific product-water quality, in Parts
per Million (PPM). The factory setting is 800 PPM Total Dissolved Solids (TDS), expressed as NaCl (i.e,
Sodium Chloride, or salt).
d) Manually control the System pressure by increasing or decreasing the back point pressure regulator set
point.
2. Display: Change the Touch Screen's color contrast for better viewing.
3. Accepted Salinity Level: Change the accepted salinity level by adjusting the PPM level.
Commissioning
41