Table of Contents
Advertisement
6.2 Replacing the Battery
WARNING
To avoid false readings and potential dangerous situations,
replace the battery immidately when the "
appears. Turn off the meter and disconnect the test leads
before opening the battery cover to prevent electrical shock
and personal injury.
Use the following steps to replace the battery:
1.Turn off the meter.
2.Remove test leads.
3.Unscrew and remove battery cover from back of meter.
4.Replace used battery with a new 9V battery.
5.Replace battery cover and fasten securely.
6.3 Replacing the Fuse
WARNING
Turn off the meter and disconnect test leads before opening
back cover to avoid electical shock and personal injury.
Use the following steps to replace the fuses:
1.Turn off the meter.
2.Remove test leads.
3.Remove outer holster.
4.Unscrew and remove back cover from the meter.
5.Replace blown fuse(s) with same amp/voltage ratings.
6.Replace back cover and fasten securely.
7.Replace outer holster.
" symbol
17
6.4 Replacing the Probe
If
insulation
on
probe
is
damaged
WARNING
Use meet EN 61010-031 standard, rated CAT III 600V, 10A or
better probe.
7. Accessories
1
Test Leads
Package
2
9V Battery
3
4
User's Manual
K type thermocouple
5
,
.
replace
it
1set
1pcs
1pcs
1pcs
1pcs
18
Advertisement
Table of Contents
