Table of Contents
Advertisement
MAINTENANCE
8.
This section provides basic maintenance principles, including replacing
batteries and fuses.
Do not attempt to repair or perform any maintenance on the meter not
included in the section below unless you are qualified personnel.
CLEANING
9.
WARNINGS
To prevent injury or damage to the meter, do not allow moisture
inside the casing. Before opening the battery cover/case,
disconnect test leads from all circuits.
Clean the meter regularly with a damp cloth and a small amount of
detergent; do not use abrasives or solvents. Dirty/wet input jacks can
affect readings.
To clean input jacks:
1. Turn off the meter and remove test leads.
2. Brush off any dirt or contaminants from the input jacks.
3. Use a cotton swab with a cleaner/lubricant (i.e. WD40)
to clean the input jack.
4. Use a new swab on each jack to prevent cross contamination.
15
REPLACING THE BATTERIES
10.
To avoid false reading that could lead to injury or damage to the
meter, replace the batteries as soon as the "
Turn off the meter and remove the test leads before opening the
battery cover to avoid injury or damage to the meter.
To replace the batteries:
1. Turn off power to the meter.
2. Remove test leads from input jacks.
3. Loosen the screw on the battery cover and remove cover from meter.
4. Replace used batteries with new batteries.
5. Replace battery cover and secure to meter.
REPLACING THE FUSES
11.
To prevent injury or damage to the meter,
turn off power to the meter and disconnect test leads
from input before opening case.
To replace the fuses:
1. Turn off power to the meter.
2. Remove test leads from input jacks.
3.
Remove the 6 screws on the back case
and remove back case from meter.
4. Replace blown fuse(s) with a new fuse.
5. Replace back cover and secure to meter.
DISPOSAL / RECYCLE
12.
Caution: This symbol indicates that equipment and its accessories
shall be subject to a separate collection and correct disposal.
WARNINGS
" symbol appears.
WARNINGS
16
Advertisement
Table of Contents
