Unitron T Max series Manual page 15

Push button
Your hearing aids are equipped with
a push button which can be set for
switching between programs or to
adjust your volume.
Program control
If the push button has been configured as
a program control, each time you push the
button, you will move to a new hearing aid
program.
Your hearing aids beep to indicate which
program you are in.
Program setting
Program 1 (e.g. automatic program)
Program 2 (e.g. speech in noise)
Program 3 (e.g. easy-t/telephone)
Program 4 (e.g. music)
Easy-t/telephone
Easy-DAI
DuoLink (if enabled)
20
Beeps
1 beep
2 beeps
3 beeps
4 beeps
short melody
short melody
Opposite ear beeps
the same as side
being adjusted
Volume control
If the push button has been configured as a
volume control:
Push the button on your right hearing aid to
•
increase the volume in both hearing aids.
Push the button on your left hearing aid to
•
decrease the volume in both hearing aids.
Volume setting
Recommended volume level
Turning volume up
Turning volume down
Maximum volume level
Minimum volume level
Beeps
1 beep
short beep
short beep
2 beeps
2 beeps
21