Changing The Picture Resolution; Flash Strobe - AIPTEK Qt CAM FLASH Installation Manual

Picture resolution may only be changed when the camera memory is empty.
If there are any pictures stored in your camera, the memory must be cleared
first. To change resolution, press the mode switch until the resolution icon is
displayed. To select "Hr" or " Lr", press SW1. Then the LCD shows the
number of remaining pictures at the current setting.
Flash Strobe Button: It's on the back of your camera. Green light appears
on the square when flash strobe is activated. To activate flash strobe, move
the flash dial up.
Warning : Avoid direct exposure to eyes.

Changing the picture resolution

Flash strobe

SW1
Change mode to "Hr" or "Lr"
"Hr" or "Lr" is displayed
Press SW1 to change resolution
On:
The flash is turned on.
Off:
The flash is turned off.
.. 6 ..