PowerBox Systems voltage regulator Instruction Manual page 2

Dear customer,
the voltage regulator is designed to supply a defined, sta-
bilised voltage to your receivers and servos. lt is a com-
pact, lightweight device with an excellent performance,
and has been developed and manufactured in-house.
This unit enables you to use modern LiPo, LiIon, NiMh or
LiFe batteries as the power supply in your models.
The device is based on an IC which delivers a regulated
linear voltage of 5.3 or 5.9 Volt; these values are fixed, and
cannot be altered.
A constant voltage substantially increases the effective
life of all the components of your RC system, but especi-
ally of the servos. The totally unvarying voltage provides a
substantial increase in the useful life of all components,
but especially of servos. Since the regulated voltage is
maintained at an absolutely constant level, all servos al-
ways operate with equal power and speed - regardless of
load.
Any servo feedback currents which may arise are reliably
eliminated by an electrolytic capacitor of generous capa-
city. Since the voltage regulator weighs just 12.5 gram-
mes it can be installed in any model without imposing a
significant weight increase.
PowerBox-Systems − World Leaders in RC Power Supply Systems