Scope - Seagate SAVVIO ST9300405SS Product Manual

2.0

Scope

This manual describes Seagate Technology
Savvio drives support the SAS Protocol specifications to the extent described in this manual. The SAS Inter-
face Manual (part number 100293071) describes the general SAS characteristics of this and other Seagate
SAS drives. The Self-Encrypting Drive Reference Manual, part number 100515636, describes the interface,
general operation, and security features available on Self-Encrypting Drive models.
Product data communicated in this manual is specific only to the model numbers listed in this manual. The data
listed in this manual may not be predictive of future generation specifications or requirements. If you are
designing a system which will use one of the models listed or future generation products and need further
assistance, please contact your Field Applications Engineer (FAE) or our global support services group as
shown in Section 1.0.
Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.
Standard models
ST9900805SS
ST9600205SS
ST9450405SS
ST9300605SS
Note. Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption
(FDE) models before a differentiation between drive-based encryption and other forms of encryp-
tion was necessary.
Note. The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for
"Security of Data at Rest" based on the standards defined by the Trusted Computing Group (see
www.trustedcomputinggroup.org).
For more information on FIPS 140-2 Level 2 certification see Section 8.0 on page 44.
2
® ®
LLC, Savvio 10K.5 SAS (Serial Attached SCSI) disc drives.
Standard SED models
ST9900705SS
ST9600105SS
ST9450305SS
ST9300505SS
SED (FIPS 140-2) models
ST9900605SS
ST9600005SS
ST9450205SS
ST9300405SS
Savvio 10K.5 SAS Product Manual, Rev. D