Seagate PIPELINE HD ST1500VM002 Product Manual page 12

Drive Specifications
Table 1 Drive specifications summary for 2000GB and 1500GB Models (Continued)
Drive specification
Power-on to ready (max)
Standby to ready (max)
Track-to-track seek time (typical)
Average seek (typical)
Startup current (typical) 12V (peak)
Voltage tolerance
(including noise)
Ambient temperature
Temperature gradient (max)
Relative humidity
Relative humidity gradient (max)
Wet bulb temperature (max)
Altitude, operating
Altitude, nonoperating
(below mean sea level, max)
Operational Shock (max)
Non-Operational Shock (max)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power
Idle**
Seek
Nonrecoverable read errors
Warranty
Load/Unload cycles
Supports Hotplug operation per the
Serial ATA Revision 3.0 specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power
to operational levels
12
ST2000VM002
<17s
<17s
<1.0ms read;
<1.2ms write
<12ms read;
<13ms write
2.0A
5V: ± 5%
12V: ±10%
0° to 75°C (operating)
–40° to 70°C (nonoperating)
20°C per hour (operating)
30°C per hour (nonoperating)
5% to 95% (operating)
5% to 95% (nonoperating)
30% per hour
37.7°C (operating)
40.0°C (nonoperating)
–304.8m to 3,048m
(–1000 ft. to 10,000+ ft.)
–304.8m to 12,192m
(–1000 ft. to 40,000+ ft.)
80 Gs at 2ms
300 Gs at 2ms
2Hz–22Hz: 0.25 Gs,
Limited displacement
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
2.0 bels (typical)
2.2 bels (max)
2.2 bels (typical)
2.4 bels (max)
14
1 per 10 bits read
To determine the warranty for a specific drive, use a web browser to access the
following web page: support.seagate.com/customer/warranty_validation.jsp
From this page, click on the "Verify Your Warranty" link. You will be asked to
provide the drive serial number, model number (or part number) and country of
purchase. The system will display the warranty information for your drive.
300K at 25°C, 50% rel. humidity
www.seagate.com
ST1500VM002
<17s
<17s
<1.0ms read;
<1.2ms write
<12ms read;
<13ms write
2.0A
5V: ± 5%
12V: ±10%
0° to 75°C (operating)
–40° to 70°C (nonoperating)
20°C per hour (operating)
30°C per hour (nonoperating)
5% to 95% (operating)
5% to 95% (nonoperating)
30% per hour
37.7°C (operating)
40.0°C (nonoperating)
–304.8m to 3,048m
(–1000 ft. to 10,000+ ft.)
–304.8m to 12,192m
(–1000 ft. to 40,000+ ft.)
80 Gs at 2ms
300 Gs at 2ms
2Hz–22Hz: 0.25 Gs,
Limited displacement
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
2.0 bels (typical)
2.2 bels (max)
2.2 bels (typical)
2.4 bels (max)
14
1 per 10 bits read
Yes
Pipeline HD SATA Product Manual, Rev. B