Advertisement
CARE & MAINTENANCE
TO REMOVE COVER
1. To remove the main cover unclip clips (B and C) located at the lower back of the seat.
Lift and peel away A from seat.
2. To remove the base cover unclip clips (D) and feed SecureGuard™ Device (E) through
the cover and peel away from seat.
A
B
C
D
TO REPLACE COVER
1. To replace the main cover align trim to slots and lift elastic (A) over top of seat, clip
the clips (B and C) located at the lower back of the seat.
2. To replace the base cover clip clips (D) and the back of the base and feed through
SecureGuard™ Device (E) through the cover.
26
Instructions for Installation & Use - Series No. HP4050A-020133
B
E
C
D
MESSY MAT™ (IF SUPPLIED)
Place ribbed or pocket end of the Messy Mat seat
protector on edge of car seat, smooth back toward
seat join ('A') and fit in any excess Messy Mat into
the join of the car seat ('A').
Hook and loop attachment referred in some
instruction books, are no longer required to fit this
model of Messy Mat seat protector.
CAUTION:
The pocket, if fitted, is only for small, light items. DO
NOT overload the pocket with heavy, bulky items as
this may damage the pocket or cause passengers to
trip over them.
For other seat protectors please read their instructions.
Instructions for Installation & Use - Series No. HP4050A-020133
ACCESSORIES
Short Messy Mat
(If fitted)
'A'
Pocket
Note: Some Messy Mats
may not have pockets.
27
Advertisement
