Advertisement
HOW TO USE
WITH LAP-SASH SEATBELT
A. Place the booster seat in the desired seating position.
B. Seat the child in the seat. The child's shoulders must be between the lower and upper
shoulder height markers.
C. Pull the seatbelt out fully and place the lap belt over the child's hips and thighs,
BOOSTER SEATBELT PATH
across the red
tongue, ensuring there are no twists in the belt. If the seatbelt buckle is adjustable,
adjust the buckle as low as possible away from the child.
20
Instructions for Installation & Use - Series No. HP4050A-020133
label, engage seatbelt buckle and
BOOSTER SEATBELT
PATH
label
D. Feed the sash-belt across the child's chest and through the sash guide. The sash
guide should be used to correctly position the sash portion of the lap-sash seatbelt
over the child's shoulder and across the chest. Continue to adjust the height of the
sash guide so that the guide is above the child's shoulder as the child grows. To
adjust the height and position of the sash guide see page 18 and 19.
IMPORTANT: ALWAYS USE THE SASH GUIDE
ALWAYS USE THE SECUREGUARD™ DEVICE.
Instructions for Installation & Use - Series No. HP4050A-020133
HOW TO USE
21
Advertisement
