Installing the Rack-Mount Shelf Kit
Figure 9: After adjusting the rear rack posts
Installing Shelf Brackets and Crossbar in a Two-Post Rack with 17.5-inch (44.45 cm) Opening
You have to rear-mount the shelf brackets and the crossbar for a rack with a 17.5-inch rail-to-rail opening.
Important
Perform these steps:
Before You Begin
You will require:
• Number 1 and Number 2 Phillips screwdrivers
• 3/16-inch flat-blade screwdriver
• Tape measure and level
Catalyst 6880-X Switch Hardware Installation Guide
14
Installing the Switch
OL-30827-02