Pioneer KFDH075UW Technical Manual page 15

Condensing unit Installation Condensing unit Installation
Unit Lifting
Holes at the unit base are for the lifting purpose.
Belt shall be used for lifting the unit, properly tied the
belt to the holes , use shackles to tighten the belt.
Make sure the belt strenght is able to withstand the unit
weight.
The length of the belt shall be adjust properly,
in order to prevent the imbalance of the unit when lifting
Unit Support
Unit shall be placed on a secured base, on slab ,
curb or steel frame
Absorber should be installed to absorb the
unit vibration during operation.
Absorber
Slab/ curb