Table of Contents
Advertisement
4
Graphs of measured temperatures
Click on the window with the current measured temperature value to
display the relevant graph.
4.1.
X axis
The X axis displays the time. This is absolute time, as the graph is redrawn
every 60 seconds and the data is then shifted. Roll to display historical
data. The current time set by the mobile device is displayed below the X
axis. Ten minutes of data from the history can be displayed.
4.2.
Y axis
The Y axis displays temperature. The user can choose between °C or °F
in the main settings.
4.3.
Magnifier + and Magnifier -
• By clicking on Magnifier+, the values from a longer period of time (the previous 10 minute) are
displayed on the X axis of the graph.
• By clicking on Magnifier-, the values from the shorter period of time are displayed in greater detail on
the X axis of the graph.
4.4.
Clicking on AutoY OFF and AutoY ON
• Click on AutoY ON to automatically change the scale of the Y axis so that the graph contains minimum and
maximum measured values.
• When AutoY OFF is displayed, the scale of the Y axis does not change but is set by the user (Main settings/Graph
step). The display in the direction of the Y axis is sliding depending on the currently measured temperature
4.5.
Cross
Click on the cross to close the graph window.
4.6.
Graph availability
Graph data is available only until the application is switched off. If the application is switched off and then on again,
the graph starts from the beginning. However, data is preserved if the glove is accidentally disconnected (without
application restart).
Holík International
Holík International
www.senspro.cz
DE
EN
PL
FR
RU
ES
23
Advertisement
Table of Contents
