Subscribe to Our Youtube Channel
Summary of Contents for Holik SensPro
- Page 1 www.holik-international.com...
-
Page 2: Instructions For Operation And Maintenance
® Instrucciones de uso y mantenimiento de los guantes Composición del material Instrucciones de la aplicación SensPro ® Le mode d’emploi et d’entretien Composition des matériaux Le mode d’emploi de l’application SensPro ® 操作和维护 材料组成 指示为Sens Pro 指令应用 ® Holík International... - Page 3 SensPro ® Protective gloves for firefighters with electronics and sensors...
-
Page 4: Table Of Contents
SensPro Protective gloves for firefighters ® SensPro Electronics for glove ® with implemented sensors Contents: Instructions for operation and maintenance 1. Introduction 2. General description 3. Description of functions 4. Start-up 5. Reading temperatures and light signals 6. Accumulator charge and discharge time 7. -
Page 5: Introduction
® Protective gloves for firefighters with electronics and sensors Introduction Congratulations on your purchase of SensPro ® protective gloves for firefighters. You are now the owner of a globally unique type of gloves with technology to measure the temperature of the surface of the glove and the temperature of remote objects by means of sensors. -
Page 6: Description Of Functions
3 Laser pointer 4 Switch (Power switch/Mode switch) 5 Bar graph 6 Status LEDs 7 Accumulator box Fig. 1: Location of functional elements on the back of the glove Fig. 2: Location of accumulator box inside glove Holík International Holík International www.senspro.cz... - Page 7 SensPro ® Protective gloves for firefighters with electronics and sensors 3.2. Sensors The temperature sensor (1) for reading the temperature on the surface of the glove is located on the ring ringer and is protected by a cover made of DuPont™Nomex ®...
- Page 8 3.7. Control unit The control unit is located on the back side under the second layer of the glove. This unit collects data from sensors and transfers data to external devices using wireless communication technology. Holík International Holík International www.senspro.cz...
-
Page 9: Start-Up
100 °C, the bar graph shines green and the status LED (6) is blue. 4.3. Wireless pairing with the glove The glove can be paired using wireless communication with the SensPro ® application installed on a smartphone or tablet. -
Page 10: Reading Temperatures And Light Signals
For this reason, a password (provided with the gloves) is required to make changes. The customer must set their own internal rules as to who is authorised to change values. More information is available in the instructions for the SensPro ®... - Page 11 SensPro ® Protective gloves for firefighters with electronics and sensors 5.4. Measuring with the IR sensor The range of measuring with the IR sensor is from -70 °C to +380 °C. The laser pointer next to the IR sensor shows the user the middle of the measured area of the remote object.
- Page 12 1, which means that temperature measurements of these materials will be more precise. The glove will signal a temperature for these materials that is closer to reality. Holík International Holík International www.senspro.cz...
-
Page 13: Accumulator Charge And Discharge Time
SensPro ® Protective gloves for firefighters with electronics and sensors Accumulator charge and discharge time The operating time of the glove is 24–32 hours, depending on the use of the laser pointer. It takes approximately 2 hours to charge the accumulator, depending on the type of charger used. -
Page 14: Maintenance
IR sensor and laser pointer are unobstructed and that the head of the temperature sensor is clean and has direct contact with the air. The SensPro ®... -
Page 15: Storage
SensPro ® Protective gloves for firefighters with electronics and sensors Storage Store the gloves in a dry and dark space at temperatures of 5 °C to 25 °C. Store the accumulator in a dry and dark space at temperatures of -20 °C to +50 °C. -
Page 16: Technical Parameters
Technical parameters Name: . SensPro protective gloves for firefighters ® Glove electronics with implemented sensors Type: . SensPro ® Manufacturer: . Holík International s.r.o. Za Dvorem 612, 763 14 Zlín, Czech Republic info@holik-international.cz Type of protection: . II 2G Ex ib op is IIC Gb... -
Page 17: Intellectual Property
SensPro ® Protective gloves for firefighters with electronics and sensors Intellectual property, trademarks: SensPro – a registered trademark of Holík International s.r.o. ® HiPro ® – a registered trademark of Holík International s.r.o. Compact – EU industrial design – No. 001597147-0001 of Holík International, s.r.o. -
Page 18: Material Composition
Material composition of SensPro gloves ® Upper material: Back: DuPont™ Nomex ® fabric with ceramic coating Palm: 50% DuPont™ Kevlar /50% DuPont Nomex knitted fabric with silicon coating ® ® Reinforcement – back: HiPro – Hidden Protection ® • special construction of inner reinforcement of the back •... - Page 19 SensPro ® Protective gloves for firefighters with electronics and sensors...
-
Page 20: Application Instructions
Instructions for the SensPro ® application Holík International Holík International www.senspro.cz... -
Page 21: Downloading The Application
Android or IOS operating system; if not, request an upgrade from the manufacturer. • A problem can occur with the application after updating the mobile device. In this case, uninstall the SensPro application and then ® reinstall it. -
Page 22: Main Screen
• A red icon indicates that the glove accumulator will soon be discharged (0%–10%). 3.4. Name and surname of glove user The name and surname of the user registered in the user settings is displayed. Holík International Holík International www.senspro.cz... - Page 23 SensPro ® Protective gloves for firefighters with electronics and sensors 3.5. Temperature values measured by the temperature sensor are displayed The current temperature measured by the temperature sensor is displayed. This is the temperature on the surface of the glove. The user can choose between °C or °F in the main settings. The icon or parts of the icon are colour-coded in the same way as the LED of the glove bar graph.
-
Page 24: Graphs Of Measured Temperatures
Graph data is available only until the application is switched off. If the application is switched off and then on again, the graph starts from the beginning. However, data is preserved if the glove is accidentally disconnected (without application restart). Holík International Holík International www.senspro.cz... -
Page 25: Application Settings
(LED blinks red), the mobile device reports this circumstance by vibrating and emitting an acoustic signal. • WakeLock When the WakeLock function is switched on, the device’s screen will not go to sleep with the SensPro application in the ON mode. ® – Graph settings •... - Page 26 Application connection has no bearing on this figure. • Minimum and maximum IT and TC temperature Displays the minimum and maximum temperatures measured by both sensors throughout the entire life of the gloves. Holík International Holík International www.senspro.cz...
- Page 27 SensPro ® Protective gloves for firefighters with electronics and sensors 5.5. About the application • Application version • Application instructions 5.6. Disconnect glove The application can only be connected to one glove at a time. If one application is intended to consecutively serve multiple pairs, click this icon to disconnect the current gloves and to connect the next pair.
- Page 28 SensPro application was developed by the RICE centre ® at the University of West Bohemia. The electronic version of the updated Instructions is available on our website under ‘Download’. www.holik-international.com...
- Page 29 NOTES:...
- Page 30 NOTES: Holík International www.senspro.cz...
- Page 31 42329 Wuppertal Czech Republic Germany Tel.: +420 577 125 500 Tel.: +49 202 7866278 Fax: +420 577 125 555 Fax: +49 202 7866279 e-mail: info@holik-international.cz Mobil: +49 17 1 5050965 www.holik-international.cz e-mail: mail@holik-gmbh.de www.holik-gmbh.de Holík America, LLC 50 Davids Drive, Hauppauge...
- Page 32 www.senspro.cz...
Need help?
Do you have a question about the SensPro and is the answer not in the manual?
Questions and answers