Table of Contents
Advertisement
SensPro
®
Protective gloves for firefighters with electronics and sensors
10
Storage
Store the gloves in a dry and dark space at temperatures of 5 °C to 25 °C.
Store the accumulator in a dry and dark space at temperatures of -20 °C to +50 °C.
11
Disposal
Dispose of gloves that are no longer used in an environmentally-friendly manner. The product
must not be discarded with common household waste. The gloves with an electronic device and
accumulator should be taken for recycling to a collection location designated for this purpose, or
the gloves can be sent back to the manufacturer, Holík International, where they will be liquidated in
the prescribed manner. Further information on product recycling can be found at local government
offices or at waste management companies.
12
Please note – instructions for safe use
The electronics are built into the glove, and their casing provides coverage
of at least IP 20. The mechanical integrity of the entire glove is important
for the safe use of the product.
Do not charge the accumulator in a space where there is a threat of
explosion!
Use only an SG-AB-01 accumulator from the glove manufacturer – Holík
International.
The accumulator charger must meet the IEC 60950, IEC 61001-1 or other
technically equivalent standards.
While charging, keep the accumulator out of the reach of children.
If the electrical device suffers mechanical damage, it must be exchanged.
Never try to remove the electronic device from the glove on your own.
Device repairs are performed by the manufacturer – Holík International.
Do not use or leave the gloves in the vicinity of a device producing a strong
magnetic field.
Avoid hitting the eyes of a human or an animal with the laser beam.
Do not puncture the gloves with a needle, safety pin or any other object.
14
Advertisement
Table of Contents
