Downloading The Application; Connecting The Application To The Glove - Holik SensPro Instruction For Operation And Maintenance

SensPro ® Protective gloves for firefighters with electronics and sensors
1

Downloading the application

The SensPro ® application can be downloaded to your mobile device from Google Play or the App Store. You will find
the application under the name SensPro
Your mobile device must have these minimum HW parameters:
• Wireless Bluetooth communication at version 4.0 or higher
• OS Android 4.4 and higher (Android 5.x or Android 6.x recommended)
• OS IOS 8 and higher (iPhone 4s, 5, 5c, 5s, 6, 6 Plus with Bluetooth 4.0 wireless communication)
2
Connecting the application with the glove
20
.
®
2.1.
Switch on the SensPro
device.
Switch on wireless communication on your mobile device. After a short
search for SensPro gloves in the vicinity, the application will offer one or
®
more available gloves. Click on one of the gloves to establish a connection.
2.2.
If you are unable to connect to your glove:
• Click on the icon to repeat the search.
• Restart the application and the glove.
• Check to make sure the glove has a sufficiently charged accumulator.
• Make sure your mobile device has wireless communication switched on.
• Make sure your mobile device meets the HW requirement for wireless
communication, version 4.0 and higher, and that you own a device with
a supported mobile Android or IOS operating system; if not, request an
upgrade from the manufacturer.
• A problem can occur with the application after updating the mobile
device. In this case, uninstall the SensPro
reinstall it.
® glove and the SensPro ® application on the mobile
application and then
®