Optional 2-Way Lcd Remote Transmitter Description; Adding/Replacing Optional 2-Way Transmitters - Scytek electronic ASTRA 1000RS-DBP Product Manual

2-way LCD Remote Transmitter Description
Button 1
The Astra 4000RS-2W-1 is supplied one 2-way LCD remote transmitter, offering increased range and
confirmation of any activated features.
Button 1 Arms the system and when held for 5 seconds, activates the system's Panic feature. Button 1 also
locks the doors when the system is in Valet Mode.
Button 2 Disarms the system. Button 2 also unlocks the doors when the system is in Valet Mode.
Button 3 Activates the Auxiliary 1 output normally used for trunk release (note trunk icon on button).
Button 4 Activates the Remote Start feature.
Button 5 is the Confirmation, Programming and the Page Shift button. Quickly pressing button 5 will activate
the Page 2 function. Pressing button 5 for 2 seconds activates the system's confirmation feature which will
then display the current status of the system ( armed, disarmed, engine running, etc .).
Page 2
Button 1 Silently Arms the system.
Button 2 Silently Disarms the system.
Adding/Replacing Optional 2-way LCD Transmitters
When adding a 2-way LCD transmitter to the system, follow these steps:
1. Turn on the ignition key On, Off, On, Off, On, Off, and back On. (Key On 4 times)
· The siren will chirp 4 times.
2. Press and hold the Override switch for 5 seconds.
· The siren will chirp 4 times.
· The LED will illuminate.
3. Press Button 1 on the first transmitter then on the second transmitter.
· The siren will chirp once for each transmitter learned.
4. Turn off the ignition key.
5. The siren will chirp three times to indicate system has exited programming mode.
Button 2
Button 3
Button 4
Button 5
Page 4 - ASTRA/G55