System Programming; Entering System Programming; Default Reset; Programmable System Options - Scytek electronic ASTRA 1000RS-DBP Product Manual

G55 series vehicle security system with remote start

Hide thumbs

Table Of Contents

Table of Contents

Entering System Programming

The system programming is compatible with both the LCD transmitter or the standard AM transmitter.

To enter System Programming:

1. Turn on ignition.

2. Within 5 seconds, press the valet switch 5 times.

· The siren will provide three chirps, indicating that you have entered Programming.

3. Press the valet switch the number times equal to the System Parameter you want to change.

· The siren will chirp each time the valet switch is pressed.

4. Within 5 seconds, press the transmitter button corresponding to the desired operating mode for

that System Parameter.

· The siren will chirp to indicate the setting.

1 chirp

2 chirps

3 chirps

5. When you are finished, turn off the ignition to save the changes.

Default Reset

Following this procedure will set all System Programming Parameters to factory default settings.

1. Enter System Programming.

2. Press Transmitter Button 3.

· The siren will chirp 6 times indicating that the reset signal was received.

· All System Programming parameters are now set to factory default settings.

· The Valet Mode is off.

3. Turn off ignition.

Programmable System Options

The following is a description of the programming options of the system. Some of the program branches

control more than one option, and may require accessing a particular branch number twice in order to

program all desired features.

1. Arm Mode. Selects between Manual and Passive Arming.

2. Auto Rearming Mode. When selected, the system will automatically re-arm and lock 30 seconds after

it is disarmed regardless if a door is open or closed.

3. Arming Chirps. Selects between normal and silent operation.

4. Warn-Away Pager Report. When Enabled, Warn-Away report will be sent to the pager. If Disabled

no Warn-Away report will be sent to the pager.

5. Extended Parking Lights. When Enabled, upon Disarming Parking lights will turn On for 30 seconds

or until the Dome light turns Off.

6. Ignition Door Locking / Override Code Set. This dual program branch selects Ignition Door