Wi-Fi Protected Setup (Wps); Using Wps To Connect To A Network - Epson M1120 User Manual

2. Hold down the
3. Use your computer or wireless device to select the Wi-Fi network name (SSID) and password listed
in the Wi-Fi Direct section of the network status sheet.
4. If you are connecting an Android device, the
Do one of the following:
• Press the Wi-Fi button to connect the device.
• Press the
You should now be able to print to your product directly from your computer or device. If you cannot
print successfully, repeat the process above and make sure you enter the password exactly as
written on the network status sheet.
Parent topic:
Related tasks
Printing a Network Status Sheet

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect
your device to the network.
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
1. Press the WPS button on your router or access point.
network status button until the power light flashes to print a network status sheet.
stop button to cancel the connection request.
Wi-Fi Direct Mode Setup
Wi-Fi Networking
Wi-Fi and Wi-Fi Direct lights flash simultaneously.
22