Troubleshooting - Workzone Q1W-SP02-2300B User Manual

Troubleshooting

WARNING!
Risk of injury!
Tampering with the washer could pose a risk to life from electric shock, damage the
washer and void warranty claims.
− Do not make any modifications to the washer.
The following table provides assistance in the event of malfunctions. If the solutions
provided here are unsuccessful, contact the manufacturer or an authorised service
centre at the service address specified on the warranty card.
Fault
No function
Washer is working, but
keeps cutting out.
Cause
The power supply is
interrupted.
The washer is switched off.
Individual components are
defective.
The mains cord
damaged.
An internal electrical
connection has become
loose.
The ON/OFF switch
is defective.
Check the power
connection, mains
cord
repairs performed by an
electrician if necessary.
Move the ON/OFF switch
4
to ON.
Contact the manufacturer
or an authorised service
centre at the service
address specified on the
warranty card.
3
is
Contact the manufacturer
or an authorised service
centre at the service
address specified on the
warranty card.
4
Troubleshooting
Solution
3
and fuse; have
25