Using Detergent With The High Pressure Washer - Workzone Q1W-SP02-2300B User Manual

Application
NOTICE!
Always release the trigger of the gun before turning the spray gun.
NOTICE!
The nozzle must be used only when the nozzle is in the correct
position, not when positioned between two different settings.

Using detergent with the high pressure washer

− Engage gun safety lock (FIG 13).
− Gently pull the detergent containers out of storage position,
and fill with detergent. Push the containers back into storage
position. (FIG 19)
− Turn the nozzle to low pressure marking as shown, configuring
the machine to LOWPRESSURE. Unlock the trigger.
In case of skin or eye contact with detergents: rinse with an
abundance of clean water
Fill the detergent bottles with detergent. In case of concentrate, dilute
detergent as instructed.
The model Q1W-SP02-2300B is equipped with two detergent bottles.
This allows for storage of different detergents for special applications.
Use the detergent switch
Turn on the pressure washer. Pull trigger to operate unit. The liquid
detergent will automatically mix with water and be discharged
through the nozzle. Apply detergent to a DRY work surface, from
bottom to top.
Allow detergent to remain on the surface for a short time before
rinsing. Do not allow detergent to dry on surface
Rinse with clean water under high pressure. On a vertical surface, rinse
from the bottom up, then rinse from the top down to avoid streaking.
22
21
to select the required detergent.