Workzone Q1W-SP02-2300B User Manual page 6

Safety
− Do not open the housing; instead, have a qualified professional
carry out the repairs. Contact a qualified workshop for this.
Liability and warranty claims are waived in the event of repairs
performed by the user, improper connection of the device or
incorrect operation.
− Only parts that comply with the original device information
may be used for repairs. This washer contains electrical and
mechanical parts which are essential for providing protection
against sources of danger.
− Do not operate the washer with an external timer or separate
telecontrol system.
− Do not immerse the washer or the mains cord or mains plug in
water or other liquids.
− Never touch the mains plug with damp hands.
− Never pull the mains plug out of the socket by the mains cord;
instead, do so by taking hold of the mains plug.
− Never use the mains cord as a carrying handle.
− Keep the washer, mains plug and mains cord away from open
flames and hot surfaces.
− Lay the mains cord so that it does not pose a tripping hazard.
− Do not kink the mains cord and do not lay it over sharp edges.
− Never store the washer in such a way that there is a risk of it
falling into a tub or a basin.
− Never reach to retrieve an electrical device if it has fallen in
water. In this case, immediately disconnect the mains plug from
the socket.
− Make sure that children do not insert any objects into the
washer.
− Always switch the washer off and pull the mains plug out of the
socket when you are not using it, when you intend to clean it,
to replace parts, or in the event of a fault.
− THE PVC or polychloroprence-sheathed power cord,
or extension cables(H05VV-F) are acceptable for use
at temperatures at or above 0
12
o
C