Assembling The Washer - Workzone Q1W-SP02-2300B User Manual

3. Check whether the washer or the individual parts exhibit signs
of damage. If any damage is visible, do not use the washer.
Contact the manufacturer at the service address specified on
the warranty card.
WARNING!
Risk of injury!
The washer could be inadvertently activated and cause injury.
− Ensure that the washer is disconnected from the mains before
you assemble the washer.

Assembling the washer

WARNING!
Health hazard!
The washer must not be directly connected to the drinking water
network because the return flow of water poses a risk to the
drinking water.
Pull out the transport handle. (FIG 1)
Pull out the transport handle
Attach hand cranks. (FIG 2)
Fix hand cranks
Assemble gun holder and gun holder base. (FIG 3)
Attach the gun holder
pressure washer.
Connect the high pressure hose to the spray gun. (FIG 4)
Push the high pressure hose into the spray gun
with an audible "click".
NOTICE!
18 to the hose and cord reel.
20 and gun holder base
1 until it audibly snaps into place.
First use
19 to the
11
until it locks
17