Sauder 109830 Manual page 17

Step 12 Step
Pull the LARGE DRAWER FRONT BRACKETS (10G) apart
å
and slide them into the grooves in the LARGE DRAWER
SIDES (D48 and D49). You may need to gently tap them
in using your screwdriver and hammer.
NOTE: The DRAWER FRONT BRACKETS are marked
å
"RH" and "LH" for easy identifi cation.
Fasten the UPPER DRAWER FRONT (L2) to the LARGE
å
DRAWER FRONT BRACKETS (10G). Use a GOLD 9/16"
LARGE HEAD SCREW (5S) through each BRACKET and
into the pre-drilled holes in the UPPER DRAWER FRONT.
Slide a DRAWER BOTTOM (D716) into the grooves in the
å
LARGE DRAWER SIDES (D48 and D49).
NOTE: Be sure the DRAWER BOTTOM inserts into the
å
groove in the UPPER DRAWER FRONT (L2).
Fasten a LARGE DRAWER BACK (D78) to the LARGE
å
DRAWER SIDES (D48 and D49). Use four BLACK 1-9/16"
FLAT HEAD SCREWS (30S).
Repeat this step for the other large drawer using the
å
LOWER DRAWER FRONT (M2).
U n
fi n
s u
i s h
r f a
e d
c e
2
D716
D48
L2
www.sauder.com/services
D49
BLACK 1-9/16" FLAT HEAD SCREW
(8 used for the DRAWER BACKS)
VIEW THE T-SLOT BOX VIDEO
10G
1
L2
3
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
D48
BACK groove.
30S
109830
Tap down with
your screwdriver
and hammer.
D49
D49
D48
Groove
GOLD 9/16" LARGE HEAD SCREW
(8 used for the BRACKETS)
D78
D49
5S
Page 17