Decommissioning Check List - EFOY ProCube 2060A User Manual

3. Operation

3.9 Decommissioning Check List

√ Required action
 1) Switch off the load
 2) Open / Unlock EFOY ProCube
 3) Switch the EFOY Pro fuel cell manually off via the operating panel
 4) Switch off the main switch of the EFOY ProCube
 5) Disconnect the load from the solar charge controller
 6) Disconnect the solar module from the solar charge controller
 7) Disconnect the batterie(s)

8) Disconnect the charging cable and the data line of the operating panel from the
EFOY Pro fuel cell.

9) Disconnect the exhaust hose. Protect it against contamination and seal the
exhaust gas duct with protective cap.

10) Disconnect the fuel cartridge connector(s) and the M28-adapter from the EFOY
fuel cartridge.
 11) Close the EFOY fuel cartridge(s) with the protective cap
 12) Remove the EFOY fuel cartridge(s) from the EFOY ProCube.
 13) Open the mounting belt(s) and remove the batterie(s) from the EFOY ProCube.
Then close the belt(s) again.
 14) Remove the EFOY Pro fuel cell from the mounting plate and remove it from the
EFOY ProCube. Then lock the mounting plate again.
 15) Secure loose cables and mounting belt(s) for transport.
 16) Close and lock the EFOY ProCube
To switch off the EFOY Pro fuel cell, please refer to the EFOY Pro user manual.
CAUTION!
Do not store or install the EFOY Pro fuel cell at temperatures below 0 °C as
long as it is not connected to a battery/ voltage supplier.
CAUTION!
Transport the EFOY ProCube only without inserted EFOY Pro fuel cell, batteries
and fuel cartridges. Carry and lift the EFOY ProCube only in twos.
18