3 Product Features
Series FMAX is an absolute magnetic length measuring system and only of use for recordation of lengths. It con-
sists of a guide carriage, where sensor technology and translator are placed, and a guide rail FSMAB. A mag-
netic tape is installed on the guide rail. The guide carriage is guided contactless over the magnetic tape.
Typical applications are paper cutting machines, hydraulic presses, wood- and sheet metal processing ma-
chines.
Overview of features:
no reference adjustment necessary
direct measurement
measuring lengths up to 650 mm
high resolution up to 0.01 mm
repeating accuracy +/- 0.01 mm
protection against dirt and dust
easy installation
Interfaces: RS232, RS422 and SSI ( 9.1)
3.1
Functional Principle
Three sensors are guided over a magnetic tape, recorded with three tracks. The following illustration shows the
three magnetic tracks with following north- and South Pole magnetization, sensed by magneto-resistive resistor
measuring bridges. Between the single magnetic tracks there always is an equal shifting X. This is evaluated
together with the single signs of the resistive resistor measuring bridges and delivers an absolute value. An un-
ambiguous classification of a absolute position is possible by the combination of the phasing of the three mag-
netic tracks. The phase position zero repeats every 650 mm for each of the three tracks.
Track 1
S N S N S N S N S N S N S N S N S N S N
U
1
Track 2
S N S N S N S N S N S N S N S N S N S N
U
2
S N S N S N S N S N S N S N S N S N S N
Track 3
U
3
0
X
∆ X
Figure 1: Functional Principle
Sensor 1
Sensor 2
Sensor 3
L = max. 650 mm
S
N
S S
- 7 -
Product Features
S N S N
S N S N
S N S N
0