Water Connection - Bosch EasyAquatak 100 Original Instructions Manual

Hide thumbs Also See for EasyAquatak 100:
Table of Contents

Advertisement

Available languages

Available languages

OBJ_BUCH-3419-001.book Page 4 Thursday, October 26, 2017 10:34 AM
4 | English
high-pressure hose, power gun or
safety devices are damaged.
Warning: Inadequate extension cords
can be dangerous.
If an extension cord is used, the plug
and socket must be of watertight con-
struction. The extension cord must
have a cross section in accordance
with the operating instructions and
be protected against splashed water.
The connection must not be in water.
When replacing plugs on the power
supply cable or extension lead the
spray water guard and mechanical
stability must remain intact.

Water connection

Comply with the regulations of your
water supply company.
All connecting hoses must have prop-
erly sealed joints.
Make sure that the supply hose is at
least 12.7 mm (1/2") in diameter and
is reinforced.
The appliance should never be used
on the drinking water supply without
a back flow valve. Water which has
passed the back flow valve is regard-
ed as undrinkable.
The high-pressure hose must not be
damaged (danger of bursting). A
damaged high-pressure hose must be
replaced immediately. Only use hos-
es and connections recommended by
the manufacturer.
High-pressure hoses, fittings and
couplings are important for the safety
of the appliance. Use only hoses, fit-
tings and couplings recommended by
the manufacturer.
F 016 L81 746 | (26.10.17)
Only clean or filtered water should be
used for intake.
Application
Before use, check that the unit and
operating equipment are in perfect
condition and are safe to operate. Do
not use the unit if it is not in perfect
condition.
Do not direct the jet against yourself
or others in order to clean clothes or
footwear.
Do not use solvent-containing liq-
uids, undiluted acids, acetone or sol-
vents! This includes petrol, paint thin-
ners, heating oil. The sprayed vapour
is highly flammable, explosive and
toxic.
The appropriate safety regulations
must be observed when using the unit
in dangerous areas (e. g. petrol sta-
tions). It is forbidden to operate the
unit in potentially explosive locations.
The unit must be placed on a solid
base.
Take care if using the machine in a
confined space ensuring that there is
adequate ventilation. Ensure that all
vehicles are switched off at all times
whilst cleaning.
Do not operate from a ladder. Take
care when using the machine on bal-
conies or other raised areas ensuring
that you can see any edges at all
times.
Only use detergents recommended
by the manufacturer. Comply with
the application, disposal and warning
instructions of the detergent manu-
facturers.
Bosch Power Tools

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents