Devolo Magic 1 WiFi 2-1 Manual page 41

41 Network configuration
Fig. 13: Powerline overview
Pairing – Establishing a PLC connection
In order to use a new devolo Magic 1 WiFi in your
devolo Magic network, first you have to connect it to your
existing devolo Magic adapters devices as a network. This
is accomplished by using a shared password. This can be
assigned in different ways:
Using dLAN Cockpit or the devolo app (see Chapter
3.4 Installation of devolo software),
devolo Magic 1 WiFi
Only using the PLC button (see Chapter 2.3 Pairing –
Establishing a PLC connection and 3.3 Connecting
the devolo Magic 1 WiFi)
Using the web interface, in the PLC menu; as descri-
bed below:
Pairing – Using physical button and on-screen button

First, press the PLC button on a devolo Magic adapter
in your existing network.

Then, click Pairing to start the pairing operation. This
may take some time.
As soon as the new devolo Magic adapter is integrated
into your existing network, it appears in a list of available
and established connections (see Chapter PLC connecti-
ons).
Pairing – Using custom password
You can also assign your network a custom PLC password
you pick yourself. Enter this password for each
devolo Magic adapter in the Network password field and
confirm your settings by clicking the diskette icon.
Note that the custom password is not assigned to the
whole PLC network automatically. Instead, you must
assign it separately to each of your devolo Magic adap-
ters.