Table of Contents
Advertisement
500ML Lighting Control Console
Cuelist View Window - Top Row Buttons
As shown in
Figure
• Edit Cuelist - used to open the Edit Cuelist Window of the selected cuelist in the cuelist view.
• Link Selected - links the cuelist shown in the cuelist view to the selected cuelist.
• Auto Scroll - automatically scrolls the windows contents if the current cue is advancing the end of the active dis-
play area.
Cuelist View Window - Background Colors Meanings
The Cuelist View uses background colors to emphasize the state of a Cue:
Background Color
Magenta
Changing Cue Names and Timings
To change Cue Names and Timings, you first need to open up a Cuelist Window as described previously. As soon as
the Cuelist View
like to change. Press the [SET] key and enter the desired timing value.
• Cue - This column indicates the Cue number, which may not be changed.
• Name - This is the Name of the Cue, which may be modified to provide a brief description of the Cue.
• Next Time - This is the time that needs to pass until the next cue will be started.
• Fade Time - This is the duration of the crossfade that happens when fading into this cue. It also defines the Out-
fade time from the previous Cue.
• Snap Time - This is the time after all parameters that are set to be a "Snap-Channel" (in the fixture library) will
snap to their new value.
Note: A Next Time of 0 (zero) sets the cuelist to wait for a "Manual Go" command if the Run Mode is set to Auto,
Timecode, or if a Master Speed Fader controls cuelist timings.
Edit Cuelist Window
To open the Edit Cuelist Window as shown on
the cuelist you would like to edit the options of - i.e., [1]. Finish the command by pressing [ENTER].
Figure 49: Cuelist View Window - Top Row Buttons
49, the buttons shown are:
Grey
This is the cue that will be run when the cuelist is activated.
Green
This is the current cue and this cue is active and running.
Red
This is the current cue, but the cuelist is paused.
This is the next cue that will be run when the cuelist is in "Learn Timing" state.
Yellow
This Cue is currently in outfading state because the cuelist has been switched off.
(Figure
48) for the appropriate cuelist has been opened up, select the cell with the value you would
State
Figure 50 on page
36, type [EDIT] [CUELIST], followed by the ID of
QuickStart Guide
35
Cuelists
Advertisement
Table of Contents
