Storing Cues In Cuelists Using Cuelist Pool Window; Cuelist View (Cue Sheet) Window - Philips Strand Lighting Quick Start Manual

500ML Lighting Control Console
QuickStart Guide

Storing Cues in Cuelists Using Cuelist Pool Window

Once you created a look and wish to store it as a cue, press and hold the [REC] key and simultaneously press the
[CUELIST] key. The Cuelist Pool window (Figure 47) will open. Select a cuelist to store the cue.
Figure 47: Cuelists Pool Window
Alternatively, with an external monitor attached, you may directly record to a cuelist in a cuelist pool on the external
monitor by pressing [REC] followed by the desired cuelist in a Cuelist Pool window.

Cuelist View (Cue Sheet) Window

To change cuelist timing or cue names, you need to do so in a Cuelist window. Cuelist View (Figure 48) may also be
used as a Cue Sheet, indicating the current, previous, and next cues.
Figure 48: Cuelist View (Cue Sheet) Window
Press and hold the [OPEN] key and press the [CUELIST] key. The Cuelist Pool window will open up. Now press and
release the [OPEN] key again - the Command Line Interface will now read Open. Select a cuelist from within the
Cuelist Pool Window.
To open the cuelist window for a Cuelist that is assigned to a Master, press [OPEN] followed by the Play [] or
Pause / Back Key [❚ ❚] on a Master.
3 4
Programming